Skip to main content

Potato peeler „Fama Industrie“ 30 kg on legs

Add to Cart
  • Potato peeler „Fama Industrie“ 30 kg on legs
  • Potato peeler „Fama Industrie“ 30 kg on legs
  • Potato peeler „Fama Industrie“ 30 kg on legs
  • Potato peeler „Fama Industrie“ 30 kg on legs
  • Potato peeler „Fama Industrie“ 30 kg on legs

Potato peeler „Fama Industrie“ 30 kg on legs

30 kg potato peeler on legs

This machine peels up to 700 kg of potatoes an hour, taking 120–150 seconds for a 30 kg load. It is the largest „Fama Industrie“ potato peeler, built for canteens, caterers and other kitchens that get through a lot of potatoes.

The machine stands on black legs and is 910 mm high. This version has no waste filter drawer: water and peelings go straight out through the drain outlet.

The body is made of AISI 304 stainless steel. A fan-cooled, Italian-made 0.96 kW asynchronous motor drives the disc through a belt.

Potato peeler „Fama Industrie“ 30 kg on legs

Abrasive disc and abrasive belt

The potatoes are peeled by the spinning abrasive disc and by the drum walls, which are lined with an abrasive belt. The disc turns at 240 rpm, while water fed through a solenoid valve rinses the peelings away.

The abrasive belt can be replaced without tools, and the abrasive parts are designed to make the machine easy to use, clean and maintain. Look for replacement abrasive discs and abrasive belts in the ‘Potato peeler spare parts’ category.

Abrasive disc of the „Fama Industrie“ 30 kg potato peeler

Controls, safety and unloading

The control panel has a multifunction digital timer: set the peeling time with the + and − buttons and read it on the display. The electrics are housed in a separate insulated plastic box.

The lid is stainless steel with an inspection window. Safety microswitches stop the machine when the lid or the discharge door is opened. Peeled potatoes are unloaded through the front discharge door and chute using the manual discharge button.

Digital control panel with timer on a „Fama Industrie“ potato peeler

Installation

Connect the water supply with a 3/4″ flexible hose; the water temperature should be 5–20 °C. Waste water can go to a wall drain (Ø 50 mm side outlet) or a floor drain (Ø 50 mm bottom outlet). The machine is built for a three-phase 400 V or a single-phase 230 V supply — select yours under ‘Electrical voltage’.

What’s included

The machine comes with an abrasive disc, an abrasive belt and a stainless steel lid.

We sell three versions of the 30 kg „Fama Industrie“ peeler: on legs, with stand and with high stand. They all peel the same way; what differs is the height, the weight, the drain outlets and whether there is a waste filter drawer.

Technical specifications

Manufacturer„Fama Industrie“
Manufacturer codeFP116P (400 V), FP114P (230 V)
Versionon legs
Maximum load30 kg
Outputup to 700 kg/h
Peeling cycle120–150 s
Disc speed240 rpm
Power supply400 V three-phase or 230 V single-phase, 50 Hz
Motor power0.96 kW (1.3 HP)
Motorasynchronous, fan-cooled, made in Italy
Drivebelt
Abrasive surfacesabrasive disc and abrasive belt (belt replaceable without tools)
Control paneldigital, with multifunction timer
Unloadingfront discharge door and chute, manual discharge button
Lidstainless steel, with inspection window
Safetymicroswitches on the lid and discharge door
Waste filter drawerno
Drain outletØ 50 mm side outlet (wall drain) or Ø 50 mm bottom outlet (floor drain)
Water connection3/4″ flexible hose, with solenoid valve
Water temperature5–20 °C
BodyAISI 304 stainless steel
Dimensions (W × D × H)640 × 780 × 910 mm
Net weight54 kg
Gross weight62 kg
ComplianceCE
Country of originItaly
Potato peeler
Manufacturer „Fama Industrie“
Manufacturer code FP116P (400 V), FP114P (230 V)
Version on legs
Maximum load 30 kg
Output up to 700 kg/h
Peeling cycle 120–150 s
Disc speed 240 rpm
Power supply 400 V three-phase or 230 V single-phase, 50 Hz
Motor power 0.96 kW (1.3 HP)
Motor asynchronous, fan-cooled, made in Italy
Drive belt
Abrasive surfaces abrasive disc and abrasive belt (belt replaceable without tools)
Control panel digital, with multifunction timer
Unloading front discharge door and chute, manual discharge button
Lid stainless steel, with inspection window
Safety microswitches on the lid and discharge door
Waste filter drawer no
Drain outlet Ø 50 mm side outlet (wall drain) or Ø 50 mm bottom outlet (floor drain)
Water connection 3/4″ flexible hose, with solenoid valve
Water temperature 5–20 °C
Body AISI 304 stainless steel
Dimensions (W × D × H) 640 × 780 × 910 mm
Net weight 54 kg
Gross weight 62 kg
Compliance CE
Country of origin Italy
Manufacturer product page: Open manufacturer page

Write your review

Manufacturer:
Fama Industrie
Code:
FP116P/FP114P
2,642.22 € (Excl. VAT)
Electrical voltage